HEPMP-B series for Lifting steel sheet

Catalog

online service

TEL: +86-731-28679879
FAX: +86-731-28679979
Mobile: +86 139 0733 7319
E-mail: info@hvr-magnet.com

   Skype Me™!    

HEPMP-B series for Lifting steel sheet
Home >>products >> Electro Permanent Lifting Magnet >>HEPMP-B series for Lifting steel sheet
products

Related Products

  • HEPMR series for lifting bundled round steel
  • HEPMB series for lifting steel billets
  • HEPMSL series for lifting steel slabs
  • HEPMSP series for lifting single round steel and steel pipe
  • HEPMP-V series for lifting steel plate
  • HEPM1 series Electro-Permanent lifting magnets

The series EP magnets are used for lifting single piece of thin steel sheet of below 6mm thickness, These magnets can generate 12kg/cm² lifting force, furthermore it will not lift the second piece steel sheet.

electro permanent magnet sheet Lifter Features:
1)Electrical power is only required when cycling from Magnetize to Demagnetize.
2)Cycle time is 1-3 seconds depending on the size of the system.
3)No battery back-up required
4)No heat is generated since the power is not constantly applied.
5)Variable magnetic power for the handling of thin sheets of steel.
6)Magnetic lifting provides the ability to lift plates without the use of dunnage.
7)Anti-Demag feature to prevent the demagnetize cycle during the lift.
8)All lifters are tested to 3 X the safe working load.
9)Permanent-Electro Technology requires no moving in the magnetic modules.

HEPMP-B series for lifting steel plate

 

Main technical parameters
Model
Rated lifting capacity(kg)
Max.pull-off strength(kg)
Overall dimension(mm)
weight(kg)
A
B
H
D
n
M
HEPMP-100B
100
600
350
106
49
45
3
6
15
HEPMP-200B
200
1200
350
162
49
45
3
6
22
HEPMP-300B
300
1850
500
162
49
45
3
6
30
HEPMP-500B
500
2800
500
218
49
60
3
10
40
HEPMP-600B
600
3700
650
218
49
60
3
10
50
HEPMP-800B
800
4650
500
330
49
80
4
12
60
HEPMP-1000B
1000
5600
650
302
49
80
4
12
75
HEPMP-1500B
1500
8400
950
302
49
100
4
16
105
HEPMP-2000B
2000
11200
950
386
49
100
4
16
145
Note 1. The definition of rated lifting capacity for series EP magnets: Rated lifting capacity=The max.pull-off strength at 1.0mm working air-gap/1.5.